ABB Module INIIT13 ABB INIIT-13 ABB INIIT 13 Network Process Module NEW in sealed box
Product Description:
In some operating modes, the counter can count downwards,too. If this is wanted, the input U/D (Up/Down)of the function block must be configured to 1. When doing so, the counter starts counting at the start value (set value) down to the end value to 32768 or from 7FFFH to 8000H. After reaching 32768, the counter jumps with the next pulse to 32767. When the counter reaches the end value END,which was set in the function block, the value CF1 is stored in the function block. Only when the counter isset again (SET), CF is reset to 0.There are operating modes, where two counters can
work independently of each other. Only in this case,the function block is used twice in the program. The
first function block is assigned with 0 at input NO(Counter number) and the second function block is
assigned with 1 at NO. In other operating modes, NO is assigned with 0.
Related Product Recommendation:
| ICSI16D1-230 | BSE003528R1 | 3BSE006085R1 |
| ICSI08D1-24 ICSI08D1 | 3BSE003529R1 | 3BSE003827R1 |
| ICSI16D1 24 | 3BSE004693R1 | 3BSE003829R1 |
| ICSI08E1-120 | 3BHT100018R1 | 3BSE001077R1 |
| ICSI08E1-230 | 3BSE003097R1 | 3BUC98002R0001 |
| ICSI16E1 -120 | 3BSE006802R1 | 3BSE001440R1 |
| ICSI08E1-24 | 3BHT100010R1 | 3BHT300003R1 |
| ICSI16E1 -24 | 3BSE010997R1 | 3BSE000756R1 |
| ICSI08E4-230 | 3BHT100010R1 | 3BSE011000R1 |
| ICSC08L1-24 | 3BUC910018R1 | 3BSE011002R1 |
| ICSC08L1-120 | 3BSE003390R1 | 3BHT300017R1 |
| ICSC08L1-230 | 3BSE003389R1 | 3BSE020520R1 |
| FPR3345601R1012 | 3BHT300019R1 | 3BSE013202A1 |
| FPR3350601R1062 | 3BSC760004R1 | 3BUR980009R1 |
| FPR3313101R1052 | 3BSC760009R1 | 3BSE000435R1 |
| HESG446433R1 | 3BSE003832R1 | 3BSE004773R1 |
| HESG446867R2 | 3BSE003816R1 | 3BSE055760R1 |
| HESG332140R1 | 3BSE006096R1 | 3BHT300012R1 |
| HESG332112R1 | 3BSE001552R1 | 3BHT00006R1 |
| HESG332121R1 | 3BSC610037R1 | 3BHT300007R1 |
| HESG332140R1 | 3BSE000863R0001 | 57120001-PS |
| HESG332140R1 | 3BUR000698R1 | 57120001-DP |
| HESG332140R1 | 3BUR000699R1 | 57120001-P |
| HESG332140R1 | 3BSC550038R3 | 5712001-HA |
| HESG332112R1 70AS06a-E | 3BSE009616R1 3BSC | 3BSE007949R1 |
| ICSO08R1-24 | 492898801 | 57120001-HZ |
| ICSI08D1-120 ICSI08D1 | TK520V030 | 3BSE014162R1 |
Product's Character:
The following two terminals are reserved for the counter and cannot be used for other purposes:
Terminal 2 (E62,00): Counting input Terminal 46 (A62,00): Output ”End value reached”
Enabling of the counting input and of the output ”End value reached” is performed via the function block with EN=1 Access within the PLC program is possible with CEs, see the documentation of the programming software,the CEs are FCWR, FCRD, FCDEL.The following three terminals are reserved for the counter and cannot be used for other purposes:Terminal 2 (E62,00): Counting input Terminal 3 (E62,01): Enable input Terminal 46 (A62,00): Output ”End value reached”The enable input enables the counting input as well as the output ”End value reached”.The counter is only enabled if the enabling input
E 62,01 1 and at the function block the input 1.
LOT 2 NEW CUTLER HAMMER H1237 HEATER OVERLOAD ELEMENT D385152
LOT 5 NEW DSO FLUID HANDLING CD0-078-000 PUMP DIAPHRAGM BUNA-N 4IN D390320
NEW LOT 2 MOLEX WMF-3901PRT MINI-FIT JR CONNECTOR 2 CIRCUIT PANEL MOUNT B477722
LOT 5 NEW IDEAL 44-103 WIRE MARKER BOOKLET D513746
LOT 74 NEW SPIROLOX RS-125 RETAINING RING 34X30X1MM D312140
LOT 12 NEW NA A2-70 FS 5/8IN THICKNESS 1-1/2IN INDUSTRIAL SCREW B236393
LOT 20 NEW SOLUS VALU GUIDE VG-292 4X2X3/4IN SPACER USED W/ VG-203/220 B377543
LOT 4 NEW HAF EQUIPMENT H-M10725 ALUMINUM BAG CUP D268691
LOT 10 NEW SCHMERSAL 0250-01-100 RUBBER SEAL 25X33X8MM D319416
LOT 2 NEW GATES ASSORTED B67 B69 BELT HI-POWER II D286657
LOT 80 NEW PANDUIT ASSORTED PN10-6F-L PV14-P47-C TERMINAL CONNECTOR D339566
LOT 3 NEW HAMBA D25M-DB9F ELECTRICAL WIRE ASSEMBLY D330206
NEW TWIN CITY 2-7/16 BAF 245 1450RPM 115V-AC 9W 9-3/4IN OD FAN ASSEMBLY D475612
NEW CATERPILLAR CAT 1A-1415 2-3/4X1-7/8-THR?EAD LOCKNUT ENGINE MACHINE B495204
NEW H&H MACHINE 414743 BRAKE CORE SHAFT ASSEMBLY D411352
NEW A325 BH 1-1/4-7 X6-1/4IN HEX CAP SCREW 7IN TOTAL LENGTH BOLT D412829
NEW WEILER 08274 ST-3 3IN X 0.020IN X 1/2-3/8IN WIRE WHEEL D481244
LOT 5 NEW INTRALOX E1B8 CAM ROLLER D417186
The use of the product:
1.chemical,
2.glass industry,
3.construction machinery,
Product's advantages:
1.Experienced technichal support team.
2.365 days warranty for all the goods from us.
3.2000+ suppliers with us, we could help you to get any components which is difficult to get.
Our advantages:
1.We keep more than 10 thousands Transistors in warehouse, it could cut lead time of most items.
2.365 days warranty for all the goods from us.
3.2000+ suppliers with us, we could help you to get any components which is difficult to get.
Frequently Asked Questions:
1. Q: Do you provide warranty for the goods?
A: Yes, we provide warranty for all the goods from us.
2. Q: Could Moore provide technology support?
A: We're in this field more than 12 years. If there's any problem, please contact with us,we'll provide suggestion from our engineer to help you solve problem.
3. Q: Does Moore keeps goods in stock or only trading?
A: We have large warehouse for goods. Keep lots of goods in warehouse, so could promise fast delivery.
Send your Inquiry details in the Below, Click "Send" Now!
Contact Information:
Contact:Miya ( manager)
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
Product Tags:
|
|
ABB Module INIIT13 ABB INIIT-13 ABB INIIT 13 Network Process Module NEW in sealed box Images
|
